Arcade Marquee Retainer Trim (2pcs) 29 Inches (74cm)
$18.99
2pcs Marquee retainer trim for holding your arcade marquee in place on most arcade cabinets. Includes a top and bottom retainer, 29 inches in length.
| Weight | 0.75 lbs |
|---|---|
| Dimensions | 30 × 1 × 1 in |
Out of stock
2pcs Marquee retainer trim for holding your arcade marquee in place on most arcade cabinets. Includes a top and bottom retainer, 29 inches each in length.
Arcade Marquee Retainer does not have pre-drilled holes to allow for variations from cabinet to cabinet. You will need to drill holes in addition to cutting to length.
OEM Suzo-Happ part number: 49-1000-00
Related products
Cocktail Table 1″ Top Glass Clips | 1.25″ Opening | Set of 8 | Midway Style
These are the best Cocktail Table Arcade Top Glass clips you will find. They are powder black powder coated (matte) and are designed to mimic the original Midway style cocktail table glass clips, only better
- This design adds two additional holes for screws. This is very handy when using these as "replacement clips" as they give you two additional holes in case your original is stripped out.
- Additionally the top of the clip is bent just slightly more than 90° to make for a very snug fit. This is important as glass varies in thickness and many people choose not to have a graphic underlayment on their table.
Comes in a set of 8 designed for 1" (25.5mm) tops with a 1/4" (6mm) glass.
If you have a 3/4" (19mm) top you need the 3/4" clips here.
Cocktail Table 3/4″ Top Glass Clips | 1″ Opening | Set of 8 | Midway Style
These are the best Cocktail Table Arcade Top Glass clips you will find. They are powder black powder coated (matte) and are designed to mimic the original Midway style cocktail table glass clips, only better
- This design adds two additional holes for screws. This is very handy when using these as "replacement clips" as they give you two additional holes in case your original is stripped out.
- Additionally the top of the clip is bent just slightly more than 90° to make for a very snug fit. This is important as glass varies in thickness and many people choose not to have a graphic underlayment on their table.
Comes in a set of 8 designed for 3/4" (19mm) tops with a 1/4" (6mm) glass.
If you have a 1" top you need the 1.25" clips here.
